Plug & Play Remote Start Kit [H-Key Manual] Fits 2016-2023 Toyota Tacoma

2016+ Toyota Tacoma Plug & Play Remote Start Kit [H-Key Manual]

Remote start your Tacoma from the FOB. 100% Plug and Play. No splicing or cutting wires. Complete kit - nothing else needed.

Compatible with Smart Phone Module to control from your phone.

Details
✔ No dealer activation required
✔ Plug & Play
✔ Printed color instructions included
✔ Complete Kit - nothing else needed
✔ Compatible with our Long Range Remote Kits
✔ Compatible with our Smart Phone Module

Requirements
✔ 2016 - 2023 Toyota Tacoma
✔ Key Start Ignition
✔ Manual Transmission ONLY

Operation
✔ To Start: Press the lock button 3 times on factory key FOB
✔ To Stop: Press the lock button 3 more times while engine is on
✔ Parking Lights will illuminate
✔ Run Time is 15 minutes
✔ All doors, and hood must be closed
✔ Vehicle must be put into "Ready Mode" by Putting foot on Brake pedal, Shifter into Neutral, E-Brake up, Foot off Brake pedal, Turn ignition off, open the door, exit the vehicle, close the door and lock. Opening up any door after this will take the vehicle out of ready mode.

Special Notes
✔ If your Vehicle has a TPMS system (non-Canadian models), you will need to cut one wire, TPMS will still function. If you have a 2020+, this wire, depending on build date, will be light pink instead of light green. Location of this wire though IS STILL THE SAME REGARDLESS.
✔ You will also need to tap (NOT CUT) your Clutch Cancel wire. Instructions provided.
✔ All wire and hardware interfacing is provided.
✔ Vehicle will NOT shut off when a door is opened
✔ You will be able to get into the vehicle after a remote start, put the key into the ignition, turn the ignition two clicks to ON position, tap the brake pedal, and now your key is in control and you can drive off!

Smart Phone Subscription Fee
✔ First year FREE
✔ Yearly Renewal Rate - $39/year
✔ In app renewal after your first free year nears its end

Installation