




LSK 2WD Race Kit fits 2005+ Toyota Tacoma
LSK Is Proud To Introduce The 2005+ Toyota Tacoma 2wd Race Kit.
Our Race Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Extended Heimed Tie Rod w/ Machined Steering Clevis And Plate Shock Tower w/ Integrated UCA Mounts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As A Dedicated Off Road Rig Or One That Sees Occasional Street Use.
KIT SHIPS RAW AND UNASSEMBLED
Included:
✔ Upper Arms
✔ Lower Arms
✔ Spindles
✔ Tierods w/ Machined Steering Clevis
✔ Shock Towers w/ Integrated UCA Mounts
✔ Grade 8 Hardware
✔ Extended Brake Lines (Minimum 33″ Line End To End)
Fitment: 2005+ Toyota Tacoma
Please Note:
➜ Requires 10" 2.5" Coilovers [NOT INCLUDED IN KIT ABOVE]
➜ Requires 10" 3.0" Bypasses [NOT INCLUDED IN KIT ABOVE]
➜ Welding is required: This is not a bolt on system and will require proficient knowledge in fabrication to perform the installation.
➜ Possible extension of factory ABS sensor line (depends on wire routing)
➜ Bumpstops: Can be configured to bump off of lower control arm, upper control arm or spindle uniball cup. Typically recommend a 2.0" body x 2" stroke
➜ Limit Straps: Recommend 8" limit strap with adjustable clevis kit
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
LSK Is Proud To Introduce The 2005+ Toyota Tacoma 2wd Race Kit.
Our Race Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Extended Heimed Tie Rod w/ Machined Steering Clevis And Plate Shock Tower w/ Integrated UCA Mounts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited For Those Who Use Their Vehicle As A Dedicated Off Road Rig Or One That Sees Occasional Street Use.
KIT SHIPS RAW AND UNASSEMBLED
Included:
✔ Upper Arms
✔ Lower Arms
✔ Spindles
✔ Tierods w/ Machined Steering Clevis
✔ Shock Towers w/ Integrated UCA Mounts
✔ Grade 8 Hardware
✔ Extended Brake Lines (Minimum 33″ Line End To End)
Fitment: 2005+ Toyota Tacoma
Please Note:
➜ Requires 10" 2.5" Coilovers [NOT INCLUDED IN KIT ABOVE]
➜ Requires 10" 3.0" Bypasses [NOT INCLUDED IN KIT ABOVE]
➜ Welding is required: This is not a bolt on system and will require proficient knowledge in fabrication to perform the installation.
➜ Possible extension of factory ABS sensor line (depends on wire routing)
➜ Bumpstops: Can be configured to bump off of lower control arm, upper control arm or spindle uniball cup. Typically recommend a 2.0" body x 2" stroke
➜ Limit Straps: Recommend 8" limit strap with adjustable clevis kit
























